Copyright©2019 Shenzhen Jayo Technology Co., Ltd.  粤ICP备15075268号  Powered by


Page view

Smart Water Heater Control Board PCBA

Customized Design:Yes
Surface treatment:Immersion Gold ( Lead Free)
Board thickness:1.0mm
Copper thickness:1oz
Substrate material:FR-4
Rang of finish boards Thickness:0.21-7.0mm
Number of Layers:1-12Layers
Product description

Functional description:

1. Instant heating/insulation: After heating to the set temperature, the electric heating tube power supply is turned off and the heat preservation state is turned on. In the heat preservation state, when the water temperature drops by 8 °C, the heating is automatically started, and the cycle is repeated.
2. Water temperature display: display the measured water temperature and set temperature.
3. Temperature setting: set the maximum heating water temperature (30~75°C).
4. Appointment: (1) Timed start: enter heating/insulation at set time; (2) timed off: exit heating/insulation at set time.
5. Night power: The system defaults to heating/insulation from 0:00 to 6:00 in the morning, but you can also set the night time period arbitrarily.
6. Energy saving: heating to 50 ° C, and automatically heating to 50 ° C when the water temperature is ≤ 45 ° C.
7. Over-temperature protection: When the hot water temperature rises to 90 °C, immediately turn off the electric heating tube power supply.
8. Sensor failure protection.
9. Leakage protection.
10. Dry burning protection.
11. Clock display.
Corresponding parameter set not found, please add it in property template of background
Previous article
Next article